Independent, unofficial resource — not affiliated with, endorsed by, or sponsored by Koenigsegg Automotive AB. Read more

MODEL SHEET — ENG-01

Koenigsegg engines, explained

In short: nearly every current Koenigsegg is built around one core engine platform — a 5.0L twin-turbo V8, engineered entirely in-house — tuned and hybridised differently for each model, from the 1,160 hp Agera RS to the 1,600 hp Jesko.
Koenigsegg 5.0-litre twin-turbo V8 engine, detail shot

Platform

One V8, several personalities

Koenigsegg's 5.0-litre twin-turbo V8 is the mechanical backbone of the current lineup. It shows up in the Agera RS at 1,160-1,360 hp, in the Jesko at 1,280-1,600 hp, as the combustion half of the Regera's hybrid Direct Drive system, and in a reworked "Hot-V" layout — turbochargers moved inside the vee rather than on the outer flanks — in the Gemera, where it's paired with electric motors for a combined ~2,300 hp.

Two fuel figures show up constantly in Koenigsegg specs: a lower number on regular pump gasoline, and a significantly higher number on E85 biofuel (an ethanol-blend fuel), which burns cooler and allows more aggressive turbo boost without the engine running into detonation limits.

Innovation

Freevalve — Koenigsegg's camless engine technology

A conventional engine uses a mechanical camshaft to open and close its valves on a fixed schedule tied to engine speed. Koenigsegg's Freevalve system removes the camshaft entirely: each valve is actuated individually, electronically, with full control over timing and lift at every point in the rev range. That flexibility can improve both efficiency and outright power, and it's one of the clearest examples of Koenigsegg's habit of engineering core components in-house rather than sourcing them.

Diagram illustrating Freevalve camless valve actuation technology

FAQ

Engine questions

Almost the entire current Koenigsegg lineup is built around one core platform: a 5.0-litre twin-turbocharged V8, developed and manufactured entirely in-house. It's tuned differently across models — from 1,160 hp in the Agera RS to as much as 1,600 hp in the Jesko on E85 biofuel, and paired with electric motors in the Regera and Gemera.

Freevalve is camless valve-actuation technology developed by Koenigsegg (through its Freevalve/Cargine subsidiary): instead of a mechanical camshaft opening and closing valves on a fixed schedule, each valve is actuated individually and electronically. That allows far more precise control over valve timing and lift at every engine speed, which Koenigsegg has used to improve efficiency and power delivery in select engine programs.